Stainless-Steel-Milledge-Coil
| Austenite Stainless Steel Grades | 304/304L, 316/316L, 304H, 304LN, 316Ti, 310S, 904L, 317L, 321/321H, 347/347H |
| Martensite Stainless Steel Grades | 446, 410S |
| Duplex Stainless Steel Grades | S31803, S32205, S32750, Duplex 2205, Super Duplex 2507 |
| Tolerance in Width | ||||
|---|---|---|---|---|
| For Mill EdgeFor Slit Edge | Range 350 to 750 mmRange 10 to 740 mm | Tolerance +5 mm in mmTolerance in width ref. to strip thickness | ||
| Width(mm) | Upto 1.00 | 1.00 to 1.75 | 1.75 to 2.50 | 2.50 TO 3.00 |
| 5 to 10 | 0.20 | ---- | ---- | ---- |
| 10 to 50 | 0.20 | 0.20 | 0.25 | 0.25 |
| 51 to 100 | 0.20 | 0.20 | 0.25 | 0.25 |
| 101 to 200 | 0.25 | 0.25 | 0.30 | 0.30 |
| 201 to 300 | 0.25 | 0.25 | 0.30 | 0.30 |
| 301 to 500 | 0.25 | 0.40 | 0.40 | 0.40 |
| 501 to 600 | 0.60 | 0.60 | 0.60 | 0.60 |
| 601 to 750 | 0.60 | 0.60 | 0.60 | 0.60 |
| Tolerance in Thickness | ||
|---|---|---|
| Strip Thickness in mm | Strip Width Max. | Tolerance in mm |
| 0.18 to 0.25 | 615 | ±0.03 |
| 0.25 to 0.70 | 750 | ±0.04 |
| 0.70 to 1.00 | 750 | ±0.05 |
| 1.00 & above | 750 | ±5% of strip thickness |
Please check with us for specifications not listed above
